Scaffolding Beam Spigot

Scaffold beam spigot features:

The spigots feature 6 holes where 60mm quick-release spring clips are placed, which then securely join the 2x 450mm wide aluminium scaffold beams at either end. Each spigot weighs around 2.5kg and is zinc-plated. This item has been designed and tested to British standards.

How is a scaffolding spigot used?

The beam spigots are secured using M12 grade bolts (8.8) or spring pins. Depending on the type of structure being built, a structural engineer may need to confirm the quantity of pins required for your project. This item has an allowable tension force high enough to withstand the total design load of the beam.

Do the bolts and clips come with the spigots?

The clips and bolts are sold separately, and it is recommended that you purchase at least 6 bolts or spring clips per connection.

How to install a scaffold spigot?

Two scaffold spigots and at least 6 spring clips are required per joint. The first spigot should be placed inside the bottom chord, and the second should be inserted inside the top chord of the 450mm wide scaffold beams, which, if installed correctly, should keep the beams securely connected. You must regularly inspect the joints to ensure they have not become loose.

Important information when installing beam spigots

Note: If you have several bays of multiple beams joined and laced together, you should always use two different beam lengths to allow the scaffold beam spigots (joints) to be staggered so that the maximum deflection and bending point vary. Otherwise, the structure could collapse.